What Is 
Advanced Recycling?

Advanced recycling is a broad term that encompasses multiple technologies that break down plastic to the molecular level, into liquid or gaseous raw materials, which is why the term “molecular recycling” is sometimes also used. Advanced recycling technologies usually involve chemical processes, unlike the physical processes used in mechanical recycling. Hence advanced recycling is also called “chemical recycling.” 

These technologies support a circular economy for plastic, in which plastic is sustainably produced, designed, used, reused, and recycled – again and again. 

Advanced recycling helps reduce plastic waste and progress toward sustainability goals for communities, states, and brands striving to make better choices. Advanced recycling technologies enable more plastics to be turned into a wide variety of new products — including highly regulated applications such as food- and medical-grade packaging — instead of landfilling them. 

Learn more about the benefits of advanced recycling in this fact sheet.

Advanced recycling is a set of manufacturing processes that transform the chemical structure of post-use plastic products back to their basic chemical or molecular components. Many of the plastics suited for advanced recycling are traditionally hard to recycle by mechanical recycling. These technologies are advancing the existing recycling capabilities through chemistry. 

Advanced recycling can help: 

• Recycle hard-to-recycle plastics, such as films, layered packaging, and mixed plastics. 

• Help recycle more of the 90% of plastics that aren’t recycled today. 

• Transition plastic manufacturing from a linear model to a circular model. 

• Limit our use of natural resources to create new plastic. 

• Create virgin quality plastic for food, medical, and pharmaceutical packaging applications. 

The waste hierarchy, created to help prioritize waste management strategies in order of environmental preference, is: re-use, re-purpose, mechanically recycle (which is melting and reforming of plastics), advance recycle (which is recycling at the molecular level) and, if necessary, landfill. Both mechanical and advanced recycling processes are needed to help keep plastic resources out of landfills and the environment. 

Mechanical, or traditional, recycling uses technologies that retain plastic’s original molecular structure. Advanced recycling typically alters the chemical makeup of used plastics, either by dissolving the plastic with solvents or chemicals, or by using heat to break down plastics into their original components. 

Mechanical and advanced recycling are complementary approaches: mechanical recycling works well for plastics such as beverage bottles and milk jugs, while advanced recycling works well for plastics that are difficult to sort and process mechanically, like flexible films. Advanced recycling technologies help increase the amount and variety of plastics that can be recycled instead of landfilled. 

How Advanced and Mechanical Recycling Complement Each Other 

(Source: Consumer Goods Forum) 

Advanced recycling technologies convert used plastics into their molecular building blocks. To understand what can be recycled, understanding the chemical structure of plastics is helpful. Here is a simple explanation: 

All plastics are polymers. A polymer is a large molecule made of repeating units of smaller molecules, called monomers, that are linked together by chemical bonds to form long chains. 

Polymers can be made by connecting a single type of monomer, such as those commonly found in packaging and durable goods from pipes to toys (e.g., polyethylene, polypropylene, polystyrene, or polyvinyl chloride); or by the reaction between two different types of monomers, such as those commonly found in carpets and clothes (e.g., polyethylene terephthalate aka polyester, nylon).  

Furthermore, plastics can be characterized as thermosets or thermoplastics. Typically, only thermoplastics are recyclable. 

• Thermoset plastics are hard and durable and are difficult to recycle due to chemical bonds between polymer chains called crosslinks. Examples include polyurethanes and epoxy resins. 

• Thermoplastics, by contrast, do not contain crosslinks and are often less rigid than thermosets, allowing the material to soften when heated and be reshaped. Thermoplastics are easily molded and extruded into films, fibers, and packaging. Examples of thermoplastics include polyethylene (PE), polypropylene (PP), and polystyrene (PS). 

Advanced recycling facilities process a mix of post-consumer and post-industrial plastics. Advanced recycling companies work with sustainability-minded companies and recycling organizations across the plastics supply chain to secure used plastics that would otherwise end up in a landfill. Recovering these plastics for recycling reduces the potential for these plastics to leak into the environment. Supply partnerships enable companies to meet their waste reduction -landfill goals.  

Advanced recycling produces virgin-quality plastic that is safe for food, medical, and pharmaceutical packaging, so it can be used in virtually any application where plastic is being used. 

Many global brands have incorporated advanced or chemically recycled plastic into their products, including luxury cosmetics and beauty brands, food companies, restaurant chains, and automakers. 

Examples of consumer brand companies that have publicly announced that they are using plastic made from advanced recycling include: 

• Estee Lauder brands including Aveda, Clinique, La Mer and Bobbi Brown 

• Nalgene and CamelBak water bottles 

• Tupperware 

• Wendy’s drink cups 

• Warby Parker eyeglass frames 

• Herbal Essences shampoo/conditioner bottles 

• Mattel playsets 

• Ethicon medical device packaging 

• Clothing brands such as Patagonia and Zara 

Advanced recycling is also used to make non-plastic products for multiple industries, such as building and construction. For example, GreenMantra Technologies uses advanced recycling to create industrial waxes that are used as performance enhancers in asphalt roofing and roads and composite lumber. 

Companies already purchasing the products of advanced recycling or that have announced agreements to do so include Gatorade, H&M, Estee Lauder, Procter & Gamble, Wendy’s and more. Many of these companies have set goals to use more recycled content. Using recycled plastic generated through advanced recycling can help companies meet their sustainability goals. 

In addition, multiple plastic makers are integrating these products and processes into their manufacturing and supply chains, such as Americas Styrenics, BASF, Chevron Phillips Chemical, Dow, Eastman, Exxon Mobil, LyondellBasell, and SABIC. These companies can take the original building blocks generated through advanced recycling and use them to create new, high-quality plastics, displacing virgin plastic derived from fossil-based sources. 

Closed Loop Partners, a N.Y.-based investment firm, interviewed 62 advanced recycling technology providers and found it has taken, on average, 17 years to reach growth scale. 

Business analysts across a wide variety of industries suggest it takes a couple of decades for technologies to scale and come to market in an effective way, and we’re right in the middle of that now with chemical recycling technologies such as pyrolysis and methanolysis in the United States. There are now companies using these technologies at scale, helping keep plastics out of landfills and in use. 

Just as our smartphones, solar panels and electric vehicles continue to evolve, advanced or chemical recycling technologies are scaling up and becoming more efficient. This is happening at the same time that hundreds of companies are committing to use more recycled plastic, so there is a tremendous opportunity in the U.S. to recycle more of our post-use plastic materials. 

As with any innovation in entering its commercialization phase, some companies may struggle coming to market, but many are succeeding and expanding operations. 

Currently, there are more than a dozen companies working on advanced recycling in the U.S. focused on optimizing for plastics-to-plastics production. Many of those initially created as pilot projects are now expanding. Recently there have been announcements for many new or expanded advanced recycling facilities, including from ExxonMobil and Eastman. Billions of dollars of investments in the U.S. and around the globe are increasing advanced recycling capacity and plastics’ sustainability. 

“The good news is that innovative technologies exist – with even more emerging and scaling – to solve these challenges. … If these technologies are more widely adopted and scaled, tremendous economic value can be realized,” according to analysis by Closed Loop Partners. “This renewed resource could displace fossil fuels being used in these markets today.” Further, there are environmental benefits from recycling used plastic back into useful products, including reducing or avoiding environmental emissions. To reach this potential, more investment is needed to support and scale these transformational technologies. 

This sentiment is furthered by AMI in its May 2024 Chemical Recycling Global Status report: “The development of the chemical recycling industry differs between regions across the globe. Europe is at present considered to be at the forefront of technological developments in chemical recycling technology. … Over the coming years, developments in North America are, however, forecast to accelerate at a faster pace.”

• These technologies can help displace the use of fossil resources by using plastic as a valuable raw material. Research shows that advanced recycling can reduce fossil energy use by 97% compared to landfilling. 

• Recycled/circular content from advanced recycling could reduce climate impact by more than 100% compared to landfilling and waste-to-energy. 

• A study by BASF and Sphera, an environment, health, safety, and sustainability consultancy, shows that advanced recycling, specifically pyrolysis, emits 50% less CO2 than incineration and saves significant CO2 emissions when manufacturing low-density polyethylene (LDPE) from pyrolysis versus LDPE from new production. 

Advanced recycling facilities have been found to have lower air emissions than other well-regulated facilities often found in our communities, including food processing, hospitals and universities. A 2021 report from Good Company, a sustainability consulting firm, studied the air emissions of pyrolysis-based advanced recycling and found them to be very low. And, just like other well-regulated facilities, advanced recycling facilities are regulated under the U.S. Clean Air Act and any state and/or local regulations for manufacturers.   

According to the Good Company report, such facilities could have: 

1. VOC and PM10 emissions similar to smaller-than-average food processing plants, 

2. Nitrogen oxides (NOx) emissions similar to institutions such hospitals, universities, and prisons, and 

3. Carbon monoxide (CO) emissions comparable to average auto manufacturing operations.

Pyrolysis as used for advanced recycling breaks down plastics in what EPA refers to as “moderately elevated temperatures,” generally less than 800 degrees Fahrenheit. In comparison to other material recycling technologies, this is very low energy intensity. For example, aluminum needs to be heated to 1200 degrees to be recycled and glass up to 2800 degrees. 

Advanced recycling reduces demand for fossil-energy based raw materials by using post-use plastics as a feedstock for many types of new products, including food- and medical-grade packaging. Some examples of products being made in the U.S. include Wendy’s drink cups, products and packaging from Estee Lauder, Warby Parker glasses, Nalgene water bottles, and many more items. All these are made in part with recycled plastics generated through advanced recycling.   

And this is just the beginning. Many global brand companies, including those listed above, have set sustainability goals to include more recycled content in their packaging. Advanced recycling will play a key role in helping these companies meet their commitments, while helping to reduce plastic waste.

Advanced recycling allows us to reuse materials that otherwise would go to waste and can also help reduce CO2 emissions during the production process.  
 
A 2023 study by the U.S. Department of Energy’s Argonne National Laboratory found in certain scenarios, plastic production through advanced recycling of used plastic via pyrolysis can help displace higher carbon fossil-based production, reducing greenhouse gas emissions and increasing the recycling rate in the United States. 

A 2022 report by the City College of New York’s Grove School of Engineering found significant environmental benefits of advanced recycling: 

• Advanced recycling technologies produce plastic and chemical products with reduced global warming potential compared to products made from virgin resources, and   

• Advanced recycling can reduce fossil energy use by up to 97% compared to landfilling.  

Another 2022 study by the Consumer Goods Forum shows that pyrolysis and related chemical recycling technologies produce lower CO₂ equivalent emissions compared to primary virgin naphtha production in most scenarios. 

Advanced recycling facilities are stringently regulated at federal, state, and local levels. These facilities are subject to the Clean Air Act under sections 111 and 112, the Clean Water Act, and other federal, state, and local requirements. They also need to obtain operating permits from the states and continue to monitor and report air emissions as they operate. Just like other manufacturing sites, advanced recycling facilities may be subject to fines and maybe even closure for operational and safety violations. State environmental officials have the tools they need to properly regulate the facilities. 

Manufacturing regulations are the most appropriate for the activities taking place at advanced recycling facilities, where sorted used plastics are manufactured into a new product that is then sold.  

Hundreds of companies have established goals to use more recycled plastic in products and packaging. How are they tracking their use of recycled materials and labeling their products accordingly? That’s where a third-party certification process like mass balance can come in – and it can be applied to a variety of recycling processes. Here is how it works: 

• Blending Recycled & Raw Materials: Advanced recycling breaks down used plastic to the molecular level. These building blocks can be used as is or mixed with raw materials to create a larger, blended stream.  

• Manufacturing Process: These combined building blocks, with properties and performance now indiscernible from each other, become the valuable materials to create something new, such as food- and medical-grade plastic.  

• Verified Recycled Plastics: Mass balance supports transparency and accurate tracking for recycled materials through an auditable chain of custody accounting methodology. Third-party certification allows companies to credibly communicate the use of recycled/circular content in their finished products. 

Mass balance is a well-established accounting method used for decades by a wide range of industries, such as renewable energy and Fair-Trade cocoa and coffee, to support sustainability statements. Regarding advanced recycling outputs, the mass balance approach is intended to provide a set of rules for how to allocate recycled content to different end products. “Ultimately, the amount of recycled feedstock that enters a steam cracker needs to equal the amount existing it, thus providing a means to estimate the average recycled content in a product,” explains AMI in its Chemical Recycling Global Status report.

Learn more about mass balance. 

Some regions use incineration or waste-to-energy facilities instead of landfilling their solid waste. This is most common in Europe and island nations.  Though some of these facilities recover some gases for energy and other purposes, this is NOT considered recycling and is a linear model where products are made, used, and discarded.  

Incineration does not fall under the umbrella of advanced recycling. Incineration refers to destroying waste materials by burning, without any provision for recovering materials. 

Conversely, during advanced recycling technologies such as pyrolysis and gasification, thermal energy (heat) is used in the absence of oxygen, so there is no combustion. This means plastics are not burned during advanced recycling. Instead of being combusted, plastics are heated and broken down into their original building blocks to form new feedstocks for plastics and chemicals, waxes and other products. 

As a manufacturing process, there is a business incentive in advanced recycling to preserve every molecule to reuse. 

Advanced recycling is a broad umbrella term encompassing many different technologies that break down a wide range of used plastic materials to create new polymers, monomers, oligomers or hydrocarbon products that can then be reused, re-entering the manufacturing supply chain instead of going to landfill. 

These technologies can create a variety of outputs, but it is only considered recycling when the output is used to create new materials or products. Converting plastics to fuel is not recycling. A decade ago, technology providers set out to convert hard-to-recycle used plastics into fuel. Technologies and the world have changed since then. Some companies still use advanced technologies to create fuel, but that isn’t considered “recycling.”